Calculate waste pipe size (DN)

Enter the outlets that drain into the pipe. The calculator adds up their discharge units (DU), works out the waste water flow and names the nominal sizes for the collecting branch, the stack and the ground pipe.

Building use

Stack with main vent (guideline)

DN 100

Unvented collecting branch DN 100 · ground pipe at 1 % DN 100

ΣDU 3.1 · waste water flow 2 l/s

How the calculator works

Every outlet has a discharge unit (DU) after DIN EN 12056-2: washbasin 0.5, shower 0.6, bathtub, kitchen sink, dishwasher and washing machine 0.8, WC 2.0 l/s, floor drain 0.8.

The waste water flow is Qww = K·√ΣDU with the discharge factor K of the building use, but at least the largest single discharge unit.

The nominal size comes from the tables of DIN EN 12056-2 for unvented collecting branches and stacks with main ventilation; the ground pipe is worked out half full at 1 % slope and is at least DN 100. With a WC every pipe is at least DN 100.

This is a guideline. Your installer checks lengths, bends and ventilation. In the editor RoomPlanning sizes every section of your waste pipes with Premium.

Plan plumbing and water pipes

Results are guide values for planning and do not replace professional planning or measuring on site.

Try it right away

Free in the browser; try it without an account. To save, export and share, create a free account.
Start a floor plan