Plan a network: network sockets, distributor, Wi-Fi and smoke alarms on the floor plan

Last updated: 16 November 2026

Try it right away

Free in the browser; try it without an account. To save, export and share, create a free account.
Start a floor plan

The best time to plan network and smart home is while the walls are still open: where do the network sockets go, where does the distributor with patch panel and router stand, where do the access points hang, and which cable runs where? In RoomPlanning you put all of it straight into your floor plan, on a layer of its own beside the electrical plan. An assistant places smoke alarms after the rule of your German state, and a check shows you for each room whether the equipment of the German standards DIN 18015-2 and RAL-RG 678 is reached. It runs free in your browser.

How many sockets you need, the network sockets calculator works out for your whole home.

How to plan network and smart home in RoomPlanning

  1. Draw the floor plan. Draw walls, rooms, doors and windows, or open a template (Drawing walls). Give the rooms names such as living room, kitchen or hallway; the equipment check tells the kind of room by them.
  2. Place network symbols. With the Network tool you place symbols from the library category Network & communication: network sockets, patch panel, network cabinet, router, fibre modem (ONT), access points and satellite connections. They sit on the layer Network & smart home, which you can show and hide.
  3. Draw the cables. With the wire tool you draw data, bus and coax cables. For each cable you choose the system, the cable type and the installation zone it runs in. The Cables & circuits panel keeps circuits and cables in view.
  4. Label the devices. On the right you give each device a label, a protocol, its supply, its power and its port on the patch panel. With Controls you note which button or actuator switches which device. Label all labels every device at once.
  5. Place smoke alarms. The smoke alarm assistant knows the rule of every German state. Choose your state, and Place smoke alarms puts an alarm in every room the rule of your state asks for.
  6. Check the equipment. The check compares each room with the equipment levels of DIN 18015-2 and RAL-RG 678 and shows you what is missing.
  7. Print. The electrical plan includes the network & smart home layer, so sockets, distributor and cables are on the sheet too (Planning circuits). On top come the network plan and the full installation plan with a legend per system, DXF with CAD layers of their own for network, bus, antenna, fibre and smart home, and the building services sheet set with electrical and network plans per storey, bill of materials and patch list.
  8. Check in 3D. The installation view (Building services: X-ray) shows every cable as a tube in its zone, in its circuit's colour, with the verticals down to the sockets and the riser points.

It is quicker with Suggest network: RoomPlanning places the double sockets of each room after the equipment value, the media distributor with patch panel and one Cat.7 cable per socket in a star, through riser points between storeys too. Antenna, SAT and fibre adds the SAT dish, multiswitch and coax cables and the fibre chain from the house connection to the router. You see both as a preview first and apply them in one step (Suggest network).

The ground floor in the editor with network sockets, an access point and dashed data cables from the riser point in the hall, plus sockets, switches and lights with their circuits.
Network and electrics on the ground floor of the Detached house with building services template.

The help Plan a network explains it step by step. What the bill of materials counts and how to export the patch list and labels is in Bill of materials and lists; cables, distributor, fibre and Wi-Fi in a new build are explained in the guide Networking a new build.

Guideline values for the home network

These are guideline values from standards, manufacturers' documents and common practice, not regulations. The double sockets per room are RoomPlanning's own recommendation.

WhatGuideline value
connections per roomunder DIN 18015-2 and RAL-RG 678, table in the guide
network socketsone double socket per connection, two in the living room, one per workplace in a study
access pointsone per storey and about 60 to 100 m², on the ceiling, with PoE
patch panelports in use plus 20 to 25% spare, 12, 24 or 48 ports
network cabinetabout 9 U for 24 ports
installation cableCat 7 installation cable with Cat 6A sockets, star to the distributor, at most 90 m per link
socket heightdata sockets like power sockets about 30 cm above the floor

All numbers per room are in the guide How many network sockets per room?.

Smart home: cable or radio

  • Cable (bus): KNX uses its own green bus cable (J-Y(St)Y 2×2×0.8). A line carries at most 64 devices and 1000 m of cable, and the actuators sit in the distributor. If you want KNX, lay the bus cable while building.
  • Radio: Zigbee, Thread and Matter, Z-Wave, Homematic IP and EnOcean need no cable of their own. With Zigbee, Thread and Z-Wave, mains-powered devices pass radio signals on. As a guideline plan one about every 10 m or every two solid walls.
  • In RoomPlanning you draw bus cables with the wire tool and note with Controls what switches what. With Premium, RoomPlanning checks the KNX rules: actuator channels and DIN-rail devices, modules against the distribution board, 64 devices, 1000 m of bus cable and 350 m to the power supply per line. The bill of materials with cable metres is free; its export as PDF, Excel or CSV is part of Premium (Bill of materials and lists).

The function list, the equipment value 1plus to 3plus and motorised roller shutters are on Plan a smart home.

Smoke alarms by German state

Smoke alarms are required in all 16 German states. Mostly they go in bedrooms, children's rooms and hallways that are escape routes. Berlin and Brandenburg add all living rooms except kitchens, Saxony asks for rooms to sleep in and the hallways to them. An alarm goes on the ceiling, if possible in the middle of the room and at least 0.5 m from walls and lights. In kitchens and bathrooms heat alarms are more common because of false alarms. The assistant in RoomPlanning follows these rules as a guideline; it does not check deadlines. The rule of every state with its law is in the guide Smoke alarm rules in Germany, how to use it in the help Smoke alarms.

Frequently asked questions

Can I plan network and smart home for free?

Yes. Network symbols, cables, the smoke alarm assistant and the equipment check are free. You can try RoomPlanning without an account.

How many network sockets do I need?

DIN 18015-2 gives at least one data connection for living rooms, bedrooms, dining rooms and the kitchen, and two for a study. With one double socket per connection a house with six rooms comes to about 8 double sockets. The calculator works it out for your home.

Where does the network cabinet go?

Usually in the utility or technical room, where the fibre connection comes in, or centrally in the hallway to keep the runs short. It needs power, best a circuit of its own, and ventilation.

Where do smoke alarms have to go?

Following the building code of your German state, mostly in bedrooms, children's rooms and the hallways to them, in Berlin and Brandenburg in all living rooms except kitchens. The smoke alarm assistant places them for your state.

Does RoomPlanning show how good the Wi-Fi is?

Yes, as an estimate with Premium. In the Network & smart home tool, the Wi-Fi coverage panel shows a heatmap over the floor plan (good from −67 dBm, enough down to −75 dBm), the share of each room with good signal, and suggests access points on the ceiling until 95 % of the living area is well covered. It works with free-space loss, walls by thickness and construction, and the loss of the slabs. The rule of thumb is one access point per storey and about 60 to 100 m². No estimate replaces a measurement on site; how it works is in Estimate Wi-Fi coverage.

May my security camera film the street?

No. Private cameras may only cover your own plot. If a camera films the pavement, the street or the neighbour's plot, the GDPR applies (CJEU C-212/13, Ryneš). RoomPlanning shows the view cone of every camera, cut off at the walls, and warns when it reaches beyond the plot you drew. Then you turn the camera, shorten its range or lay mask zones over the part outside with one click. It is free and not legal advice; more in Cameras, privacy and door intercom.

Sources

These are guideline values; have a qualified electrician install and inspect the system. Read on 15 November 2026:

Matching templates

Try it right away

Free in the browser; try it without an account. To save, export and share, create a free account.
Start a floor plan

More use cases