Plan a basement online – lower levels, terrain and 3D

Last updated: 15 November 2026

Try it right away

Free in the browser; try it without an account. To save, export and share, create a free account.
Start a floor plan

In RoomPlanning you plan a basement as a storey of its own below the ground floor. The ground floor stays at ±0; below it lie the basement and, if you like, further lower levels. You set where the terrain lies, with spot heights on a slope, and plan light wells, a light court and outside stairs. In 3D the basement then really lies in the ground. This does not replace the planning application, the structural design or the waterproofing, but you go into the meeting with your architect or builder with clear ideas.

How to plan your basement in RoomPlanning

  1. Draw the house or open a template. The ground floor sets the outer walls. The quickest start is a template you put the basement under (Plan a house).
  2. Add a basement. In the Levels panel, use the plus: Basement below, most easily with the exterior walls of the lowest storey. Add a second lower level the same way (Basements and lower levels).
  3. Set the terrain. Under Terrain, enter the ground level, usually 15 to 60 cm below the ground-floor level. If the plot lies on a slope, set spot heights, and the basement opens up on the valley side (Terrain and slopes).
  4. Divide the rooms. Boiler and plant room, utility connections, laundry, storage, workshop, hobby room, sauna, gym, home cinema or wine cellar: RoomPlanning furnishes named rooms to suit if you like (Furnishing). The area schedule lists basement rooms as usable area, apart from the living area; guest rooms and studies count as living area. Change it on the room under Use.
  5. Bring in daylight. Windows below ground get a light well. In front of living rooms you draw a light court with the Excavation, light court tool (key U), with a retaining wall or a slope.
  6. Place the stairs. Place the basement stair from the ground floor with "Leads: Down", and outside stairs from the laundry on the basement with "Leads: To the terrain".
  7. Check and look around. For habitable rooms in the basement, RoomPlanning points out rooms that are too low, windows that are too small and windows without a light well, and missing railings at excavations and outside stairs, each as a guide value of the state building code. In 3D and on a walkthrough you walk down the stairs; in a section you see the ground line and the soil (Drawings and export).

To try it out: a family house with a full basement, light wells and an outside stair.

Detached house with basement in 3D, seen from above at an angle, furnished

Detached house with basement

228.1 m² · 17 rooms

Guide values for the basement

These values are for orientation in early planning and follow German rules. What applies to your house is set by the building code, the development plan and your designer. The details are in the guide Planning a basement: ceiling height, daylight and use.

TopicGuide value
Height of habitable rooms2.40 m under the model code and most German states, 2.30 m in Baden-Württemberg
Windows of habitable roomsstructural opening at least 1/8 of the floor area, 1/10 in Baden-Württemberg
Ground levelusually 15 to 60 cm below the ground-floor level
Light wellabout 1.00 to 1.50 m wide and 0.40 to 1.00 m deep, with a grating
Railing at light courts and outside stairsfrom about 1 m drop, depending on the state
Living areacellars, boiler rooms and garages do not count (§ 2 (3) WoFlV)

What a basement is good for

  • Services and storage: heating or heat pump, storage tank, utility connections, washing machine and dryer stay out of the living rooms.
  • Hobbies and guests: hobby room, gym, sauna or a guest room with a light court.
  • Slopes: on a slope the lower level becomes a garden level with normal windows and a door to the outside.
  • Garage below the house: on narrow plots an underground garage with a ramp saves garden space (Plan a garage).

Common mistakes

  • Planned too low. Insulation and screed go on the bare slab, pipes below the ceiling. If you want to live in the basement later, plan the height generously from the start.
  • Forgetting windows. A room without sufficient windows remains a storage room, however nicely it is finished.
  • Stairs too narrow. The basement stair needs the same care as the stairs up; furniture and the washing machine have to get down.
  • Ignoring service routes. Utility connections, heating and the bathrooms above should be close together.
  • Underestimating water. Waterproofing, drainage of light wells and light courts, and protection against sewer backflow belong in the specialist design from the start.

Frequently asked questions

Can I add a basement below an existing plan?

Yes. In the Levels panel, use the plus to add a basement below the lowest storey, empty or with its outer walls. The ground floor and all storeys above stay where they are.

How many lower levels can I plan?

As many as you need: basement, basement 2 and more. RoomPlanning names them by their position relative to the ground floor.

Can I plan a house on a slope?

Yes. Shape the terrain with spot heights. A storey can then be open on the valley side and lie in the slope on the hill side. In 3D and in the elevations the terrain follows the points.

Does the basement count as living area?

Not under the German Living Space Ordinance: cellars, boiler rooms and garages are ancillary rooms. RoomPlanning lists them as usable area in the area schedule. More in the guide Calculating living area under the German WoFlV.

Matching templates

Try it right away

Free in the browser; try it without an account. To save, export and share, create a free account.
Start a floor plan

More use cases