Basements and lower levels
Step by step on the house with a basement: add a basement, stairs down, light wells, outside stairs, usable area, the basement in 3D and in the elevation.Below the ground floor you add a basement, and further lower levels below it if you like. The ground floor stays at ±0, the finished floor level. Everything lower than the terrain is shown as a level below ground. This guide shows it on the template Detached house with basement: heating and plant room, store room, hobby room and a laundry room with an outside stair, the basement windows in light wells. It takes about five minutes.
Open the template in the editor1. Open the template and look at the basement
Open the template. On the right, the Levels panel lists Floor 1, Ground floor and Basement; click a level to switch to it, or press Alt + arrow up or down. On the basement you see the earth hatch along the outside of the walls: these walls lie below the terrain. Light wells sit in front of the basement windows.

- Basement, below the terrain
- Earth along the outer walls
- Light well in front of the window
Storeys that lie wholly below the terrain carry a small excavation sign next to their height in the list of levels; point at it to read Below the terrain. Switch the hatch under Layers with Earth.
2. Add a basement
The template already has its basement. In a plan of your own you add one like this:
- Click the plus in the Levels panel.
- Under Basement below, choose one of the two options:
- Empty: an empty storey.
- With the exterior walls of the lowest storey: the outer walls are copied, you only divide the inside.

- Add level
- Basement below
The new storey lies below the lowest one so far, and RoomPlanning switches to it. Its height follows from the room height and slab thickness; the storeys above stay where they are. Add another lower level below it the same way. You also find these commands in the command search (Ctrl + K) under Levels.
3. Stairs down
The basement stair stands in the basement and leads up to the ground floor. You can still place it from the ground floor:
- Switch to the ground floor and choose the Stairs tool with S.
- On the right, below the kind of stair, switch from Up to Down.
- Click the foot of the stair and point in the walking direction.

- Down
- Stair between the storeys
The stair is created on the storey below and leads up here. On the ground floor you see the stairwell right away. Down only works if there is a storey below the current one. A lift reaches every storey, the lower levels too.
4. Light in the basement: the light well
Windows whose sill lies below the terrain need space in front of them. Switch to the basement and click the window of the store room. On the right the Light well switch is on; below it you set the Width, Depth in front of the wall and Grating.

- Light well in the plan
- Light well and its sizes
If the sill of a window without a light well lies below the terrain, the window shows the hint Window below the terrain with the button Add light well. For more light or a door to the outside, dig away the terrain in front of the room with the Excavation tool (U) on the lower level. See Terrain and slopes.
5. The outside stair from the basement
The laundry room has a door to the outside. In front of it lies a small excavation with retaining walls, and an outside basement stair leads up to the garden. Click the stair: on the right, Leads to reads To the terrain.

- Outside stair at the laundry room
- Leads to: To the terrain
To place one yourself:
- Switch to the basement and choose the Stairs tool.
- On the right, choose To the terrain.
- Place the stair outside against the basement wall, running away from the house or along the wall.
RoomPlanning works out the risers from the height between the basement floor and the terrain. A cut with retaining walls forms around the stair. To the terrain only works on storeys whose floor lies below ground level, and not for a lift. To change an existing stair, set Leads to on the right to To the terrain.
6. Basement rooms and usable area
You draw rooms in the basement with the Room tool as anywhere else. Click into the hobby room: on the right, Use reads Automatic (Usable area). Below it RoomPlanning points out that the windows are too small for a habitable room.

- Hobby room
- Use
- Hint with guide value
Under the German Wohnflächenverordnung, cellars, boiler rooms, storage rooms and garages do not count towards the living area. The Area schedule on the sheets therefore lists them as usable area, apart from the living area, with totals per storey.
Under Use you choose Automatic, Living area, Usable area or Garage. Automatic follows the name and the storey: garages count as garage; storage, boiler and plant rooms, laundries, wine cellars and workshops always as usable area. On a lower level, hobby rooms, gyms, saunas, home cinemas and rooms without a recognised name count as usable area too; living rooms, bedrooms, children's rooms, studies, kitchens and bathrooms stay living area. Names such as boiler room, plant room, storage, laundry, hobby room, sauna, gym, home cinema, wine cellar or workshop are also recognised when furnishing automatically. More in the guide Planning a basement.
7. Look at the basement in 3D
Switch to 3D at the top. From outside you only see the basement where the terrain is open: at light wells, excavations and outside stairs. If you are on the basement and set the walls under 3D view on the right to Cut, you see the storey from above, with the stair inside and the outside stair.

- Walls: Cut
- The basement
Set the walls back to Full and switch off Terrain: now the whole house stands there with its basement.

- Terrain off
- Basement below ground level
With Low the terrain on a lower level turns see-through as well, and the cut edge of the earth shows in brown. Pull levels apart hides the terrain. The walkthrough starts on the ground floor; take the stairs to go down.
8. The basement in the elevation
Under Drawings every facade shows the ground line with the level mark "GL −0.15 m". Whatever lies below it, the basement and its window here, is drawn dashed.

- Ground line, GL −0.15 m
- Basement below ground, dashed
On the ground floor, spot heights of the ground level stand at the corners of the house in the floor plan, such as "GL −0.15", and ±0.00 for the finished floor. In a section an earth hatch lies below the ground line and beside the basement walls (Drawings and export).
Names and heights of the storeys
RoomPlanning names the storeys by their position relative to the ground floor:
| Position | Name |
|---|---|
| one above the ground | Floor 1 |
| reference storey (±0) | Ground floor |
| one below the ground | Basement |
| two below the ground | Basement 2 |
| three or more below | Basement 3 |
You set where the terrain lies under Terrain (Terrain and slopes). Change the room height, slab thickness and Elevation of each storey as for any level. When you reorder or delete storeys, the ground floor stays at ±0 and the others move up or down.
Hints for habitable rooms in the basement
Living rooms, bedrooms, children's rooms, studies, hobby rooms, home cinemas and gyms on a storey that lies wholly or partly below the terrain are checked for:
- a clear room height below 2.40 m,
- a window area below one eighth of the floor area,
- windows below the terrain without a light well or excavation in front.
Fall protection is checked as well: excavations and outside stairs with a drop of more than 1 m and no railing. The hints show on the right for the selected room, window, excavation or stair, each marked "Guide value of the German model building code (MBO); check your local building code." They never block anything; what applies is set by your local building rules.