Floor build-up and heights

Step by step on a detached house: choose a floor build-up, room heights or structure, a bathroom with its own build-up, sills from the finished floor, steps and the section. Plus: refurbishment with existing and removed layers, uneven raw floors, suspended ceilings, quantities and costs.

Every storey can have a floor build-up: everything between the structural floor (SFL) and the finished floor (FFL). From it RoomPlanning works out the clear room height, the sills above the finished floor and above the structure, the steps between rooms and the raw risers of the stairs. This guide shows it on the Detached house 140 m² without building services (the template in the gallery has them drawn in already): you give the ground floor a build-up with underfloor heating, the shower room one of its own, and look at the result in the plan and in a section. It takes about ten minutes.

Open the template in the editor

1. The heights of a storey

Open the template. With nothing selected, the Levels panel on the right shows the heights of the selected storey, here the ground floor:

  • Room height (clear): from the finished floor to the underside of the slab above, here 2.8 m.
  • Slab incl. build-up: everything under the finished floor while there is no build-up, here 20 cm.
  • Elevation: the storey's finished floor. ±0.00 is the ground floor's finished floor.

Below, RoomPlanning shows the Storey height, the Finished floor (FFL), the Structural floor (SFL) and the Underside of the slab, and a small height section of all storeys. Clicking a storey in it selects that storey.

On the right the Levels panel for the ground floor: room height 2.8 m, slab incl. build-up 20 cm, elevation 0 cm, floor build-up Not specified, below storey height 3 m, FFL and SFL ±0.00 m and the height section with both storeys.
  1. Clear room height
  2. Slab incl. build-up
  3. Elevation
  4. Storey height, FFL and SFL
  5. Height section of all storeys

2. Choose a floor build-up

Click the Floor build-up field. You can pick Not specified, six standard build-ups, the plan's own build-ups and New build-up …. The ground floor sits on the ground slab, so choose On the ground slab with underfloor heating (19.5 cm).

The list under Floor build-up: Not specified, new build with underfloor heating 14 cm, new build without underfloor heating 11 cm, on the ground slab with underfloor heating 19.5 cm, dry retrofit with underfloor heating 8.5 cm, thin retrofit on the existing screed 7 cm, unheated basement 4.2 cm and New build-up.
  1. Floor build-up
  2. On the ground slab with underfloor heating
  3. Make your own build-up

3. Decide what stays

RoomPlanning now asks what should stay, and shows the consequences of both ways first:

  • Room heights stay (new build): the clear heights stay, the storey heights change. Storeys above rise; on the ground floor ±0 stays and basements sink.
  • Structure stays (refurbishment): slabs and the structural floor stay, the floor rises and the rooms get lower. Sills and door heights drop by the same amount, so windows and doors stay where they are.

For a new build leave Room heights stay selected and click Apply. RoomPlanning remembers your choice for the plan.

The dialog Change the floor build-up with the question What should stay? Room heights stay (new build) is selected; below Structure stays (refurbishment) with a clear height of 2.61 m, the storey above −19.5 cm, 8 windows with a new sill and 7 lower doors.
  1. New build: room heights stay
  2. Refurbishment: structure stays
  3. Apply

4. Look at the result

The field below the room height is now called Structural slab: the load-bearing slab under the structural floor. The SFL lies 19.5 cm below the finished floor, rounded −0.20 m, the underside of the slab at −0.40 m. The height section shows the layers of the build-up, and in the floor plan every room name shows its finished floor with the build-up's mark, for example "FFL ±0.00 m · FB1". Under Slab construction you choose concrete or timber joists.

The ground floor with the build-up on the ground slab with underfloor heating: structural slab 20 cm, the Edit build-up button, SFL −0.20 m, underside of the slab −0.40 m, the layers in the height section. In the plan FFL ±0.00 m · FB1 under every room.
  1. Structural slab
  2. Edit build-up
  3. Structural floor
  4. Layers in the height section
  5. Finished floor and build-up in the plan

5. Edit the build-up

Edit build-up opens the build-up editor, New build-up … an empty one. Every layer has a kind, a material and a thickness in millimetres. For screeds and heating systems choose the underfloor heating and the pipe. Mark layers that are there as Existing, those that come out as Removed too. The arrows reorder the layers. Below are the total and the change against the existing floor.

Save as own build-up adds a new build-up to the plan, Apply changes the one being edited. Opened from a room's panel, the editor also offers For all rooms of the storey.

New build-up … or Edit build-up opens the build-up editor. Every layer has a kind, a material and a thickness in millimetres and is New, Existing, stays or Removed. For screeds and heating systems choose the underfloor heating and the pipe. The arrows reorder the layers. Below are the total and the change against the existing floor: new layers less removed ones.

The dialog Edit floor build-up with six layers: covering tiles 15 mm, cement screed 65 mm with wet underfloor heating and a 16 mm pipe, impact sound insulation 30 mm, two layers of insulation 40 mm and a membrane 5 mm. At the bottom Cancel, Save as own build-up and Apply.
  1. Kind, material and thickness
  2. Underfloor heating and pipe
  3. Existing
  4. Save as new or apply

6. A room with its own build-up

Click the shower room. On the right, choose a build-up of its own under Floor build-up of the room, or As the storey. Choose New build with underfloor heating (14 cm) here. That build-up is 5.5 cm thinner than the storey's, so the Finished floor of the room is now at −0.06 m and the Clear room height 2.86 m. At the door to the hallway the plan shows the step of 5.5 cm.

Podium/sunken floor raises or lowers the floor on top of the build-up. With 5.5 cm the bathroom would be back at ±0.00 and the step would go.

The shower room is selected. On the right Floor build-up of the room New build with underfloor heating (14 cm), finished floor of the room −0.06 m, clear room height 2.86 m and Podium/sunken floor 0 cm. In the plan FFL −0.06 m · FB2 and +5.5 cm at the door.
  1. Floor build-up of the room
  2. Finished floor and clear height of the room
  3. Podium/sunken floor
  4. FB2 in the bathroom
  5. Step at the door

7. Windows and doors

Click the study's window. With a build-up you enter the sill measured from the Storey, the Room or the Structure. It is stored against the storey's finished floor. Below are Head above FFL and Head above SFL, here 2.15 m and 2.35 m. For doors they are the Rough opening from SFL and the Clear passage height.

The study window is selected. On the right the choice Storey, Room or Structure, Sill height (Storey) 90 cm, head above FFL 2.15 m and head above SFL 2.35 m.
  1. The window
  2. Sill measured from
  3. Sill height
  4. Head above FFL and SFL

The stair panel shows the Height FFL to FFL, the First raw riser, the Other risers and the Last raw riser. That matters for solid stairs cast before the floor is built up.

8. The heights in the plan

Zoom in: the Heights layer shows the finished floor and the build-up under every room name and the step at doors. Hide or show it in the Layers panel.

The floor plan zoomed in: study, utility room and hallway with FFL ±0.00 m · FB1, the shower room with FFL −0.06 m · FB2 and +5.5 cm at its door.
  1. Storey build-up: FB1
  2. Own build-up: FB2
  3. Step

9. The section

Choose the Section line tool (K) and click the start and end of a line across the house, here from north to south through the living room, utility room and shower room. Under Drawings at the top the section then appears on the left under Sections. It shows every layer with its own hatch, the slab, the FFL and SFL marks, the clear height from each room's finished floor and a legend of the build-ups with all their layers (Drawings and export).

Section A through the house: ground floor FFL ±0.00 m and SFL −0.20 m with the layers in the floor, 2.86 m clear height in the shower room. On the right the legend of floor build-ups with FB1 on the ground slab with underfloor heating and FB2 new build with underfloor heating and their layers.
  1. Section A
  2. Legend of the build-ups
  3. Level of the structural floor

Refurbishment: capture the existing floor

In an old building start with Capture existing floor … in the storey panel. Enter the clear room height today, the slab construction and, where known, the existing covering and existing screed with their thicknesses, for example 24 mm timber boards on a timber joist floor. The finished floor stays where it is; RoomPlanning adds the existing floor as the storey's build-up.

Then choose the new build-up under Floor build-up. Structure stays is already selected. On a timber joist floor the dry build-ups come first in the list. 24 mm boards replaced by the Dry retrofit with underfloor heating (85 mm) make the floor rise by 61 mm: the clear height drops from about 2.95 m to 2.89 m, sills and doors get lower by the same amount.

Uneven structural floor

If the old structural floor is uneven, tick Uneven structural floor (existing) in the room panel and enter its lowest and highest point against the target, for example −25 and +5 mm. RoomPlanning shows how thick the levelling layer gets at the high and the low point and counts its quantity with the mean. Without a levelling layer, or one that cannot take up the unevenness, you get a hint.

Ceiling finish and suspended ceilings

Under Ceiling finish in the room panel choose Plaster (about 15 mm), Plasterboard fixed directly (about 25 mm) or a Suspended ceiling with its depth. The clear room height drops by that much; the ceiling hangs lower in 3D and the section shows the ceiling board. A bathroom with a 20 cm suspended ceiling under 2.50 m becomes 2.30 m high, and RoomPlanning points to the 2.40 m for habitable rooms.

Floors, quantities and costs (Premium)

Floors, quantities and costs in the storey panel or the command palette opens the evaluation: per room area, build-up, FFL, SFL, clear height, edge strip and rough cost, per build-up thickness, weight, rough U-value and readiness for covering, per material area and volume with waste on coverings (8 % by default, changeable). Enter your own prices per layer right there; without one RoomPlanning uses guideline values for 2026 including laying. Save as CSV and Save as PDF give the same figures. The evaluation is part of Premium; with Free you see a preview.

On sheets there are also the Build-up legend (for everyone) and the table Floors per room (Premium) under Add.

Hints

RoomPlanning points out low rooms, too thin screed, steps over 2 cm, low sills over a drop, low doors, uneven raw risers, the U-value of floors towards soil and wet screed on timber joists. The hints are on the right in the box Hints on heights and floor build-ups, and every hint names its source. They are guidelines for early planning, never a barrier: standards, building law, manufacturers, structural engineers and energy consultants have the last word.

More on the page Plan the floor build-up. The template Refurbished period apartment shows a finished refurbishment with a timber joist floor, a dry build-up, a bathroom with its own build-up and a suspended ceiling.

Open the template in the editor