How to draw a floor plan, step by step
Last updated: 13 November 2026
Try it right away
Free in the browser; try it without an account. To save, export and share, create a free account.You draw a floor plan in five steps: measure the rooms, draw the outer walls, add the inner walls, place doors and windows, and finally name the rooms and check their areas. The most important part happens before you draw: a careful survey with every wall length, wall thickness and opening decides whether the plan is right in the end. On paper you draw to scale, usually 1:100 or 1:50. On a computer you enter the real dimensions, and the program applies the scale only when you print.

Two-room apartment 55 m²
54.9 m² · 5 rooms
What you need
- a tape measure or folding rule, and for long walls a laser distance meter,
- a sketch pad and a pencil, or your phone for a photo of every wall,
- about 30 to 60 minutes for an apartment, longer for a house,
- if you have one: an old plan from the tenancy agreement, the sales brochure or the building file. It saves a lot of work, but it does not replace measuring (Trace a floor plan from a listing).
Step 1: Measure up
First draw a rough sketch, not to scale, one box per room. Then go room by room and write the dimensions straight onto the sketch:
- Measure every wall on the inside, clockwise, from corner to corner. Measure just above the floor where no furniture is in the way, and not across skirting boards.
- Measure the diagonals. If both diagonals of a room are the same length, it is rectangular. If they differ by several centimetres, the room is out of square, and you will need the diagonal to draw it.
- Measure the wall thicknesses. The easiest place is an open door: measure the reveal from one face of the wall to the other.
- Doors and windows: width and height of the opening, the distance to the nearest corner and, for windows, the sill height from the floor to the bottom of the opening. For doors, note which room they open into and on which side the hinges are.
- Ceiling height, at least once per storey, in old buildings in every room.
- Fixed features: radiators, chimney, boxed-in pipes in the bathroom, columns, sockets and connections in the kitchen and bathroom.
Check your sums after each room: the parts along a wall must add up to its full length. This catches most mistakes while you are still standing in the room.
Step 2: Draw the outer walls
Start with the outline of the apartment or house. Draw the outer walls first, at their real thickness. For houses the outside dimensions are often known, for example from the building file. If you measured inside, draw the wall along its inner face and let the thickness grow outwards.
Common wall thicknesses in German masonry are 11.5 cm for light inner walls, 17.5 or 24 cm for load-bearing inner walls and 30 to 49 cm for outer walls, depending on the block and insulation. Plasterboard partitions are usually 10 or 12.5 cm thick. Measure anyway, because plaster and tiles add to it.
Step 3: Add the inner walls
Then follow the inner walls, room by room, with the dimensions from your sketch. Work outwards from one corner: first the walls that start at an outer wall, then the ones in between. That way small measuring errors do not add up across the whole home.
If something does not fit, it is usually a forgotten wall thickness or a boxed-in wall. Check the sum of the room widths plus all wall thicknesses against the outside dimension.
Step 4: Place doors and windows
Place each opening with its distance from the corner and its width. For doors the swing matters, because the door arc later shows where no furniture can stand. Common door sizes and hallway widths are in the guide Minimum dimensions at home, the symbols in How to read a floor plan.
Step 5: Name the rooms and check the areas
Give each room its name and check its area. If it is far from the figure in the tenancy agreement or listing, a dimension is often wrong. Bear in mind that those documents usually give the living area under the German Living Space Ordinance, where sloping ceilings, balconies and terraces count only in part (Calculate living area).
Scale on paper
| Scale | 1 cm on paper is | 1 m in reality is | typical for |
|---|---|---|---|
| 1:100 | 1 m | 1 cm | planning applications, apartment plans |
| 1:50 | 50 cm | 2 cm | construction drawings, furniture layouts |
| 1:20 | 20 cm | 5 cm | kitchen and bathroom details |
On paper you use graph paper and a scale rule, or you convert. A 3.65 m wall is exactly 7.3 cm long at 1:50.
Drawing in RoomPlanning
In RoomPlanning you enter the real dimensions, and the scale only matters when you print. You do not need an account to draw (Getting started).
- Rooms or walls: With the room tool (R) you drag out a room or type a size such as 400x300 and press Enter. For free shapes use the wall tool (W), click corner by corner and type each length (Drawing walls). Under Reference line you choose whether the wall sits centred on your line or to its left or right, so you can draw along the inner face.
- Doors and windows go on the wall with O, where you set width, height, sill and hinge side (Doors and windows).
- Areas are calculated for every room automatically.
- Check: The 3D view (3) and the walkthrough (5) show whether the plan matches reality. The measuring tool (M) checks single distances.
- Output: Under Drawings (4) you set up sheets to scale and save them as PDF, and there is DXF for CAD programs (Drawings and export). For that you need a free account.
The quickest way to learn is with a template: open a finished plan and change walls, doors and furniture. You will find examples under Floor plans.
Frequently asked questions
What scale should I draw a floor plan at?
For an overview of an apartment or house, 1:100 is enough. If you want to place furniture precisely or plan a kitchen or bathroom, use 1:50. On a computer you draw at real size and choose the scale when you print.
How accurately do I need to measure?
To the nearest centimetre is enough for furniture planning and renovation ideas. For made-to-measure kitchens and fitted wardrobes the joiner will measure again anyway, usually to the millimetre.
Do I measure inside or outside?
In an apartment you measure inside, because you cannot get to the outside. The outside dimensions follow from the inside ones plus the wall thicknesses. For a house you can measure outside and check the room sizes inside.
Can I draw a floor plan online for free?
Yes. In RoomPlanning you draw in your browser without signing up, in 2D and 3D. You only need a free account to keep more plans, export and share.
Sources
- Wandöffnungen und Türgrößen nach DIN 18101 – Baunetz Wissen (German)
- Wohnflächenverordnung (WoFlV) – gesetze-im-internet.de (German)
This guide is general information and is not legal or planning advice.
